Send Email Methods

http://www.powerasp.com/content/new/sending_email_cdosys.aspIf you are using a Windows 2000 / 2003 Server, or even XP Pro chances are that CDOSYS is your best bet for sending email from Active Server Pages. That is because CDOSYS is installed on all of them by default. Gone are the days of using CDONTS which was the old way of sending email from ASP. CDOSYS is it’s replacement.

That being said there are actually a lot of ways to configure and use CDOSYS. When I 1st started using CDOSYS I assumed the CDOSYS code I was using would work in any situation, but that is not the case. This is something most articles about CDOSYS do not mention so I am going to show you 3 different CDOSYS examples each sending email using a slightly different method.

  1. Method 1 involves sending email using a local pickup directory. Meaning you have the IIS SMTP Virtual Server Running. If you are on a local development machine this is probably for you. Under this scenario any emails you send from your scripts put a “.eml” file in the local pickup directory. Then hopefully the SMTP Virtual Server grabs the file and sends it off. The Virtual SMTP server is however known to hiccup and not send out the emails right away.
  2. Method 2 involves port forwarding. I am not exactly sure how you set that up on the server but the code I wrote for it works under that scenario. The hosting company known as Verio actually implements this with CDOSYS on their servers. I actually implemented this method in some of my software because of a customer that couldn’t get emails to send on one of their servers.
  3. Method 3 involves sending the email using a remote mail server. This supports outgoing SMTP authentication should your server require that for outgoing emails. Many do these days. This method is also the best method to use because you are using a real email server with valid MX records. Many modern email systems block emails that do not have valid MX records and you want your emails to reach the recipients.

______________________________________
Method 1 ( Local Pickup Directory where server is running SMTP Virtual Server )
______________________________________
<%
Dim ObjSendMail
Dim iConf
Dim Flds
    
Set ObjSendMail = Server.CreateObject(“CDO.Message”)
Set iConf = CreateObject(“CDO.Configuration”)
Set Flds = iConf.Fields
    
Flds(“http://schemas.microsoft.com/cdo/configuration/sendusing&#8221;) = 1
    
‘**** Path below may need to be changed if it is not correct
Flds(“http://schemas.microsoft.com/cdo/configuration/smtpserverpickupdirectory&#8221;) = “c:\inetpub\mailroot\pickup”
Flds.Update
    
Set ObjSendMail.Configuration = iConf
ObjSendMail.To = “someone@someone.net
ObjSendMail.Subject = “this is the subject
ObjSendMail.From = “someone@someone.net
    
‘ we are sending a text email.. simply switch the comments around to send an html email instead
‘ObjSendMail.HTMLBody = “this is the body
ObjSendMail.TextBody = “this is the body
    
ObjSendMail.Send
    
Set ObjSendMail = Nothing
%>
__________________________________________
Method 2 ( Using mail forwarding on port 25 )
__________________________________________
Include this metatype library code on the page you use this emailing with code because there are some things in it this method needs. You can probably get rid of these two lines if you figure out what it references but I didn’t take the time to look.

<!–METADATA TYPE=”typelib” UUID=”CD000000-8B95-11D1-82DB-00C04FB1625D” NAME=”CDO for Windows Library” –>
<!–METADATA TYPE=”typelib” UUID=”00000205-0000-0010-8000-00AA006D2EA4″ NAME=”ADODB Type Library” –>
<%
Dim ObjSendMail
Dim iConf
Dim Flds
    
Set ObjSendMail = Server.CreateObject(“CDO.Message”)
Set iConf = Server.CreateObject(“CDO.Configuration”)
    
Set Flds = iConf.Fields
With Flds
.Item(cdoSendUsingMethod) = 2
.Item(cdoSMTPServer) = “mail-fwd”
.Item(cdoSMTPServerPort) = 25
.Item(cdoSMTPconnectiontimeout) = 10
.Update
End With
    
Set ObjSendMail.Configuration = iConf
    
Set ObjSendMail.Configuration = iConf
ObjSendMail.To = “someone@someone.net
ObjSendMail.Subject = “this is the subject
ObjSendMail.From = “someone@someone.net
    
‘ we are sending a text email.. simply switch the comments around to send an html email instead
‘ObjSendMail.HTMLBody = “this is the body
ObjSendMail.TextBody = “this is the body
    
ObjSendMail.Send
    
Set ObjSendMail = Nothing
Set iConf = Nothing
Set Flds = Nothing
%>
________________________________________
Method 3 ( Using remote mail server )
________________________________________

<%
Dim ObjSendMail
Set ObjSendMail = CreateObject(“CDO.Message”)
    
‘This section provides the configuration information for the remote SMTP server.
    
ObjSendMail.Configuration.Fields.Item (“http://schemas.microsoft.com/cdo/configuration/sendusing&#8221;) = 2 ‘Send the message using the network (SMTP over the network).
ObjSendMail.Configuration.Fields.Item (“http://schemas.microsoft.com/cdo/configuration/smtpserver&#8221;) =”mail.yoursite.com
ObjSendMail.Configuration.Fields.Item (“http://schemas.microsoft.com/cdo/configuration/smtpserverport&#8221;) = 25
ObjSendMail.Configuration.Fields.Item (“http://schemas.microsoft.com/cdo/configuration/smtpusessl&#8221;) = False ‘Use SSL for the connection (True or False)
ObjSendMail.Configuration.Fields.Item (“http://schemas.microsoft.com/cdo/configuration/smtpconnectiontimeout&#8221;) = 60
    
‘ If your server requires outgoing authentication uncomment the lines bleow and use a valid email address and password.
‘ObjSendMail.Configuration.Fields.Item (“http://schemas.microsoft.com/cdo/configuration/smtpauthenticate&#8221;) = 1 ‘basic (clear-text) authentication
‘ObjSendMail.Configuration.Fields.Item (“http://schemas.microsoft.com/cdo/configuration/sendusername&#8221;) =”somemail@yourserver.com
‘ObjSendMail.Configuration.Fields.Item (“http://schemas.microsoft.com/cdo/configuration/sendpassword&#8221;) =”yourpassword
    
ObjSendMail.Configuration.Fields.Update
    
‘End remote SMTP server configuration section==
    
ObjSendMail.To = “someone@someone.net
ObjSendMail.Subject = “this is the subject
ObjSendMail.From = “
someone@someone.net
    
‘ we are sending a text email.. simply switch the comments around to send an html email instead
‘ObjSendMail.HTMLBody = “this is the body
ObjSendMail.TextBody = “this is the body
    
ObjSendMail.Send
    
Set ObjSendMail = Nothing
%>       
In addition to what you see here there are plenty of properties you can add to these examples.
Here are a few examples.

Carbon Copy
ObjSendMail.CC = “someone@someone.net

Blind Carbon Copy
ObjSendMail.BCC = “someone@someone.net

Send Attachment (we hard code it here, but you could specify the file path using Server.Mappath as well)
ObjSendMail.AddAttachment “c:\myweb\somefile.jpg”

and a ton of other things you can do…
See Microsoft’s CDOSYS Documentation

View / Download our code examples in text file format 

Advertisements